Nordson EFD Product Safety Statement
Only qualified and trained personnel may work with the unit.
CAUTION
NOTE:
Qualified personnel are persons who, due to their training, experience and instruction, as well as their
knowledge of relevant standards, provisions, accident prevention regulations and operating conditions, have been
authorized by the person responsible for the safety of the system to perform the required tasks and, in the process,
can identify and prevent potential risks (definitions for specialists according to VDE 105 or ICE 364).
Equipment must be unplugged from voltage before any maintenance or repair work is performed. This applies
particularly to connecting and disconnecting cables to the PICO controller for maintenance and repair, or to prepare
for and perform maintenance and repair.
General engineering rules apply for the planning of use of the equipment.
The device should be installed such that the electrical interfaces are easily accessible and the operating and display
elements clearly visible.
The PICO controller has been designed with state-of-the-art technology and is reliable and safe to operate. Incorrect
handling by insufficiently qualified personnel can be hazardous. It is imperative that operating personnel be properly
trained.
CAUTION
To ensure safety, repairs and hardware changes to the unit may be made only by the manufacturer.
CAUTION
The PICO controller may be used only to control the PICO
Toµch
controller or an approved 24 V valve from Nordson
EFD. The operating conditions and parameters specified by the manufacturer and included in this manual should be
complied with.
Failure to comply with the safety instructions can result in a limitation or complete loss of liability on the part of the
manufacturer. This also applies to equipment and accessories that have been acquired from another party.
PICO Controller 2+2-XCH-V2
5
www.nordsonefd.com [email protected]
+1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
