Program Cycles, Program Files, and Factory Settings (continued)
To create a program file
1. At the PICO controller, create a blank TXT file as follows:
a. Insert an SD card into the SD card slot on the front of the PICO controller.
b. Select DOWN-/UPLOAD > UPLOAD.
c. Choose the root directory, “.”
A file named “PDA2_Default.txt” is created on the SD card.
2. Remove the SD card and transfer the program file to a PC.
3. On the PC, use Microsoft Notepad to open the TXT file. For correct representation of the TXT file, use the
following settings:
• Page Setup: landscape
• Font: Lucida Console
• Font Style: Regular
• Font Size 10, Western scripts
4. Fill the program file with parameters. Refer to “Characteristics of a Control Program” on page 36 and
“Program Examples” on page 37 for information on creating control programs.
5. When the program file is complete, transfer it via SD card to the PICO controller. Select DOWN-/UPLOAD >
DOWNLOAD to load the program file into the PICO controller.
To transfer a program file to the PICO controller
6. Insert the SD card that is loaded with the control program you want to transfer into the SD card slot on the front
of the PICO controller in the correct orientation (see the symbol on the controller).
7. From the Main Menu, select Down-/Upload > Download and then select the file to be downloaded.
8. Press Enter.
If “Download Successful” appears after this step, all parts of the *.txt control program were properly transferred to
the PICO controller.
PICO Controller 2+2-XCH-V2
34
www.nordsonefd.com [email protected]
+1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.