2K Pneumatic Dispense Gun: 1500mL Instructions
Steps
1. Lube o-rings with grease.
2. Insert union tube into casting.
3. Assemble main handle into union tube.
4. Insert handle nuts into main handle.
5. Insert screws into main handle and tighten.
6.
Align holes in upper handle assembly with holes in casting. Insert
upper handles screws into castings. Upper handle can be adjusted
by loosening main nut.
1
2
3
4
5
6
Tools required
Phillips-head screwdriver
10 mm nut driver
6 mm allen wrench
(2) 13 mm nut drivers
O-Ring
Union Tube
Main Handle
Handle Nut
Handle Screws
Main Nut
(13 mm)
Handle
Assembly
Screws
4
