Nordson ASYMTEK Spectrum S-9 Series, Руководство пользователя

Страница: 24 / 36

18 Operation
4.4.2.2 Preliminary Needle to Camera XY Offset
Prior to teaching the needle to camera XY offset, prepare the offsets substrate by placing putty on the
mini service station substrate located behind the front conveyor rail.
To teach needle to camera XY offset (Figure 4-7):
1. Lower Valve 1 into the putty (just enough to make a mark).
2. Click on Teach .
3. Align the camera crosshairs over the mark in the putty.
4. Click on Teach .
5. Repeat Steps 1-4 for both tilt directions.
Figure 4-7 Teaching Needle-to-Camera XY Offset