Operate Washing Machine
P.
18
P.
19
-
Child Lock
To avoid the washing programme being disturbed by children the "Child Lock" function can be
selected. When selected all buttons except for the "On/Off" button cannot work, in this state the
machine powers off when the "On/Off"
button
is pressed. When the "On/Off" button is selected "Child
Lock"
function and the program
me
that was running prior to being powered off will be remembered.
To set the
"Child Lock" function press “Temp” and “Speed” together for 3 seconds the buzzer will
beep. The
"Start/Pause" button as well as the rotary switch will be locked. Press the two buttons again for 3
seconds and buzzer will beep, to release the lock. If there is a power cut the "Child Lock" will not be
canceled until all programmes are completed.
-
Turning off the Buzzer
This is an additional buzzer function on your appliance.
2QFHWKH
buzzer function
LVGHDFWLYDW
ed
,
the
buzzer will
QRORQJHUVRXQG
After starting the machine press the “Tem
S
” button for 3 seconds and you will hear a beep,
then the
buzzer will be
WXUQHGRII
. To restart the buzzer function press the “Temp”
button
again for 3 seconds.
The setting will be kept until the next reset.
Warning: After deactivating the buzzer function, the sounds will not be activated any more.
-
Bubble Removal Function
Bubble Check Function:
Extra
bubbles will occur when there is
an
excessive
amount of
detergent,
which will
affect
wash
ing
and rins
ing
.
When selected
,
the
pro
gramme
will check
the status of the
water and if required
the
bubble removal
cycle
will be added automatically to remove bubbles when
excessive
bubbles are
present
.
Operate Washing Machine
-
Delicate
S
elect this pro
gramme
to wash your delicate clothes
. The
washing
cycle
i
s more
gentl
e
and
the
revolution speed is less
in
compar
ison to
the “Synthetic”
programme
.
This programme is for
particularly
delicate fabrics such as machine-washable silk, satin and viscose. It is recommended that
you do not
wash these fabrics together with other rougher fabrics. The use of detergent for delicates
is
recommended.
-
Drain Only
Separate
d
rain only
programme
.
-
Spin Only
Separate spin only pro
gramme.
Soap
y
water or rinse water
will
be drained out before spinning.
-
Rinse
&
Spin
Separate
r
inse
&
s
pin
programme
.
-
My Cycle
Press
the "
Speed
" button for
3
sec
onds
for my cycle to
remember
the pro
gramme
. The default my cycle
programme
is cotton intensive.
The main function
s
can be selected as follows:
-
Prewash
The
p
rewash function
gives
an extra wash before
the
main wash.
-
Extra Rinse
The laundry will undergo
an
extra rinse
when this function is selected
.
-
Delay
The d
elay function can be set with this button, the delaying time is
between
0-24H.
Set the
D
elay
F
unction:
1.
Select a programme;
2.
Press the
"
Delay
"
button
several times to
choose the
length of
time
.
3.
Press Start/Pause to commence the
d
elay operation.
Cancel the Delay
F
unction:
1.
Press the
"
Delay
"
button until the display
shows
0H. It should be
pressed before starting
the program. If the program
me has
already started,
you should press
press the
On/Off
button.
Notes: If there is any break in the power supply while the machine is operating, a
special
memory stores the selected programme and when the power is restarted,
the
remaining
time continues.
