Page 84
Page 85
DE
EN
7 DAB+ (digital radio) function
7.1 What is DAB+?
DAB+ is a new digital format through which crystal clear sound with no noise can be heard. In
contrast to conventional analogue radio stations, DAB+ can be used to broadcast multiple stations
on one and the same frequency. This is referred to as an ensemble or multiplex. An ensemble
consists of the radio station as well as a number of service component or data services. For further
information, please visit
www.dabplus.de
or
www.dabplus.ch
.
7.2 DAB+ (digital radio) reception
>
Press the
Mode
(
5
) button until
[DAB]
is shown on the display.
If DAB+ is being started for the first time, a full station scan is performed. After the scan is
complete, the first station is played back in alphanumeric order.
7.3 Performing a full scan
The automatic scan
Full Scan
scans all DAB+ Band III stations and thereby finds all stations
being broadcast within the reception range.
6 Menu navigation
You can access all of the Transita 30 functions and settings via the menu.
Menu navigation is carried out using the
Menu/Info
(
6
) and the
Tune/Select
knob (
3
).
The menu is divided into submenus and, depending on the mode type, contains different menu
items or functions that can be enabled. To open the menu, simply hold down the
Menu/Info
button briefly. To move to submenus, first press the
Tune/Select
knob to display a submenu and
then press the
Tune/Select
knob to retrieve the submenu. An asterisk (
*
) highlights the current
selection.
Closing a menu: Push the
Menu/Info
button several times (depending on which submenu
you are in) until the current radio channel is displayed again.
Settings are not saved until the
Tune/Select
knob has been pressed. If the
Menu/Info
button is pressed instead of this, the settings are not accepted or saved (the
Menu/Info
button in this case acts as a “Back” button).
The
functions
and
buttons
to be pressed are shown in
bold
in this instruction manual.
Displays in
[square brackets]
.
Some text (e.g. menu items, station information) may be too long to show on the display.
These will be then shown as running text shortly thereafter.
