SOURCE
SOURCE
Auto Setup procedure
6
PLEASE ENSURE BOTH UNITS ARE SWITCHED OFF
BEFORE CONNECTING. Use a HDMI to HDMI cable to
connect the two units together. To select the HDMI input,
press the
Source
button on the remote control. Each time it is
pressed the on-screen menu confirms your selection.
HDMI input
5
To HDMI connection
on the device
Additionally you can set a broadcast type as your favourite one. Priority will be given to the
selected broadcast type during the search process and the channels of it will be listed on the top of
the channel list. When finished, press
OK
to continue.
You can activate
Store Mode
(optional) option at this point. This option is intended only for store
use. It is recommended to select
Home Mode
for home use.
Digital Aerial:
If this broadcast search option is turned on, the TV will search for digital terrestrial
broadcasts after other initial settings are completed.
After the initial settings are completed TV will start to search for available broadcasts of the selected
broadcast types.
After all the available stations are stored, scan results will be displayed. Press
OK
to continue. The
Edit Channel List
menu will be displayed next. You can edit the channel list according to your
preferences or press the
Menu
button to quit and watch TV.
Note:
Do not turn off the TV while initializing first time installation.
On the following screens, set your preferences using the directional buttons.
About Selecting Broadcast Type
When the TV is operated for the first time, installation wizard will guide you through the process.
First, language selection screen will be displayed. Select the desired language and press
OK.
Note:
Searching duration will change depending on the selected
Search Step
.
Digital Cable:
If
this
broadcast search option is turned on, the TV will search for digital cable
broadcasts after other initial settings are completed. A message will be displayed before starting to
search asking if you want to perform cable network search. If you select
Yes
and press
OK
y
ou can
select
Network
or set values such as
Frequency
,
Network ID
and
Search Step
on the next
screen. I
f you select
No
and press
OK
y
ou can set
Start Frequency
,
Stop Frequency
and
Search Step
on the next screen.
When finished, highlight
Next
and press
OK
button to continue.
50492374
