16
10 sec after the last operation, the timer display changes to the timer that
will run out next.
The assignment of that timer is displayed always by a flashing
Cooking
Zone Indicator
. How many timer are running you can identify by the number
of
Cooking Zone Indicator
that are statically on.
By toggling
,
you can display the timer values for the heater timer and
the minute minder. The assignment is always indicated by the flashing
Cooking Zone Indicator
. If no
Cooking Zone Indicator
flashes, the minute
minder time is shown in the 2-digit
Timer Display
.
All heater timers can be erased by switching off the appliance into the
S-
Mode
using . A minute minder will not be erased, it will proceed operation
until run out.
To erase a timer in
Operation Mode
, you first have to select the timer by
toggling the
Active/Deactive Timer Button
until it is displayed. The value
can be erased then in 2 different ways:
·
Decrement by touching until ´00` appears on the
Timer Display.
·
Touch and simultaneously for 0,5sec until ´00` is shown in
Timer
Display.
After reaching the ´00` of a heater timer, the assigned heater level will be
set to ´0`.
The heater timer or minute minder run out is indicated acoustically by a
buzzer tone. This will be erased by touching any button for acknowledgement.
Key Lock
Key lock functionality is for blocking and set the appliance into a save
modus during operation. Touch modifications as for example rise heat
settings and others should not be possible. It is only possible to switch the
appliance off.
The lock function is active, if the
Key Lock
button is pressed at least 2
sec. This operation is acknowledged by a buzzer. After successful operation
of more than 2 sec, the
Key Lock Indicator
flashes and the heater is locked.
The heater can only be locked in
Operating Mode
(
B-Mode
).
