When the timer has run down, a signal sounds and the timer display shows "
00
" statically, the
assigned cooking zone timer LED blinks. The programmed cooking zone will be switched off and the
"
H
" will be displayed if the cooking zone is hot.
The sound signal and the blinking of the timer LED will be stopped automatically after 30 seconds
and/or by operating any key.
Buzzer :
While the hob is in operation, the following activities will be signalled by means of a buzzer:
·
Normal key activation with a short sound signal
·
Continuous operation of keys over a longer period of time (10 seconds) with a longer,
intermittend sound signal.
Boost Function :
A cooking zone has to be selected, cooking level set to „desired cooking level" and P(Boost) key
has to be pressed again.
Boost-Function can be activated if the induction module accepts the setting on this cooking zone If
Boost Function is active a „P" is displayd on the corresponding display.
Activating the booster can exeed the maximum power and the intergated power management will
be activated .
The neccessary power reduction is shown by blinking of the correpsonding cooking zone display.
Blinking is active for 3 sec. and allows further adaptations of the settings before power reduction.
Smart Pause
Smart Pause, when activated, reduces the power of all burners that have been switched on.
If you then deactivate the Smart Pause, the heaters will automatically return to the previous level.
If the Smart Pause is not de-activated, the cooktop will turn off after 30 minutes.
Touch (
) to activate Smart Pause. The power for the activated heater(s) will reduce to level 1
and
“
II
”
will appear at all displays.
Touch (
) again to deactivate Smart Pause.
“
II
”
will disappear and the heaters will now run at the
level previously set.
10
