11
9. Attach the Console (85) with four #8 x 3/4"
Screws (1). Start all four Screws, and then
tighten them. Do not overtighten the Screws.
Tighten the four loops around the wires by pull-
ing on the ends of the ties.
See step 5. Tighten the 5/16" x 2 3/4"
Screws (4).
9
1
1
85
Ties
Ties
8. Have a second person hold the Console (85)
near the Console Cover (87). Insert the wires
from the Console through the indicated hole.
Connect the Upright Wire (78), the Left and
Right Pulse Wires (90, 91), and the Ground Wire
(97) to the wires extending from the Console
(85). See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF THE CONNECTORS ARE NOT CON-
NECTED PROPERLY, THE CONSOLE MAY BE
DAMAGED WHEN THE POWER IS TURNED
ON.
8
85
87
91
78
Hole
90
78
Console Wire
Wires
97
