NordicTrack Wasatch Uintah, Руководство пользователя, Страница: 7 / 24

7
Assembly requires two persons. Place all parts of the bicycle in a cleared area and remove the packing materi-
als. Do not dispose of the packing materials until assembly is completed.
Assembly requires a 5mm hex key , a Phillips screwdriver , and an adjustable
wrench .
1. Place the bicycle so that the fork and the
rear wheel rest on the floor.
Turn the handlebar stem and the fork so that
the handlebar clamp points away from the
top tube of the frame.
Handlebar
Stem
Handlebar
Stem
Handlebar
Top
Tube
Rear
Wheel
Clamp
Clamp
Clamp
Washer
Washer
Bolts
Bolt
Bolt
Fork
ASSEMBLY
2. Remove the two bolts, the two washers, and
the handlebar clamp from the handlebar
stem.
3. Orient the handlebar so that the reflector
and the brake levers face forward and the
shifters face upward.
Tip: Make sure to ori-
ent the handlebar so that the cables are
not twisted around the handlebar stem.
Tip: Start both bolts before tightening
either of them.
While a second person
holds the handlebar in a centered position,
attach the handlebar with the two bolts, the
two washers, and the handlebar clamp.