manualshive.com logo in svg

NordicTrack NTL89011.0, Руководство пользователя, Страница: 7 / 36

Поделиться
Скачать
NordicTrack NTL89011.0 Скачать руководство пользователя страница 7

7

•  Assembly requires two persons.

•  Place all parts in a cleared area and remove the 

packing materials. Do not dispose of the packing 

materials until you finish all assembly steps.

•  After shipping, there may be an oily substance 

on the exterior of the treadmill or on the shipping 

carton. This is normal. If there is an oily sub-

stance on the treadmill, wipe it off with a soft cloth 

and a mild, non-abrasive cleaner.

•  To identify small parts, see page 6.

•  Assembly requires the following tools:  

the included hex keys  

one adjustable wrench 

one Phillips screwdriver 

scissors

needlenose pliers

To avoid damaging parts, do not use power tools. 

ASSEMBLY

2.   Attach a Wheel (93) to the Base (29) with a 3/8" 

x 2 1/2" Bolt (7) and a 3/8" Nut (9). Do not over-

tighten the Nut; the Wheel must turn freely.

   Attach two Thick Base Pads (37) (one is shown) 

and two Thin Base Pads (92) (one is shown) to 

the Base (29) in the locations shown with eight 

#8 x 3/4" Tek Screws (13). Be careful not to 

overtighten the Screws.

1.  

Make sure that the power cord is unplugged. 

  With the help of a second person, tip the tread-

mill onto its right side. Partially fold the Frame 

(not shown) so that the treadmill is more stable.

   Locate the Upright Wire (91) bundled at the front 

of the Base (29). Cut the plastic tie securing the 

Upright Wire, and pull the Upright Wire out of the 

indicated hole.

   Press a Base Cap (87) into each side of the 

Base (29).

   See the inset drawing. Cut the plastic tie near 

the Upright Wire (91). Be careful not to dam-

age the Upright Wire.

91

29

Hole

Cut 

91

Tie

87

1

7

93

13

13

37

29

92

9

Cut 

2

Содержание NTL89011.0





































Отзывы:

Нет отзывов