NordicTrack NTL61011.2 Скачать руководство пользователя страница 21

Страница: 21 / 32

THE INFORMATION MODE

The console features an information mode that keeps

track of treadmill information and allows you to person-

alize console settings.

1. Select the information mode.

To select the information mode, hold down the Stop

button while inserting the key into the console and

then release the Stop button. When the information

mode is selected, the following information will be

shown:

The time display will show the total number of

hours that the treadmill has been used.

The distance display will show the total number

of miles (or kilometers) that the walking belt has

moved.

The lower section of the display will show the

status of an iFit Live module. If an iFit Live mod-

ule is connected, the display will show the words

WIFI MODULE. If a USB module is connected, the

display will show the words USB/SD MODULE. If

no module is connected, the display will show the

words NO IFIT MODULE.

2. Select the optional screens.

While the information mode is selected, the matrix

will display several optional screens. Press the

decrease button next to the Enter button to select

each of the following screens:

a. UNITS: To change the unit of measurement,

press the Enter button. To view distance in miles,

select ENGLISH. To view distance in kilometers,

select METRIC.

b. DEMO: The console features a display demo

mode, designed to be used if the treadmill is dis-

played in a store. While the demo mode is turned

on, the console will function normally when you

plug in the power cord, press the power switch

into the reset position, and insert the key into the

console. However, when you remove the key,

the displays will remain lit, although the buttons

will not function. If the demo mode is turned on,

the word ON will appear in the matrix. To turn

on or turn off the demo mode, press the Enter

button.

c. CONTRAST LVL: Press the Incline increase and

decrease buttons to adjust the contrast level of

the display.

If a module is connected, you may also select the

following screen:

d. TRAINER VOICE: To turn on or turn off the

voice of the personal trainer, press the Enter

button.

If an iFit Live module is connected, you may also

select the following screens:

e. DEFAULT MENU: The default menu will appear

when you insert the key into the console or when

you press the Home button. Press the Enter but-

ton repeatedly to select the manual main screen

or the iFit Live screen as the default menu.

f. CHECK WIFI STATUS: Press the Enter but-

ton to check the status of your iFit Live module.

The lower display will show the software version

number, the network SSID, the network encryp-

tion type, the connection status, the wireless

signal strength, the IP address of the module, the

number of registered users and their names, the

results of the DNS lookup, and the status of the

iFit Live server.

g. SEND/RECEIVE DATA: To send and receive

workouts, workout logs, and updates, press the

Enter button. When the process is finished, the

words TRANSFERS DONE will appear in the

display.

3. Exit the information mode.

To exit the information mode, remove the key from the

console.

Содержание NTL61011.2

































Результаты поиска

Содержание NTL61011.2

Отзывы:

Бренды по названию

Популярные бренды

NordicTrack NTL61011.2, Руководство пользователя

Результаты поиска

Содержание NTL61011.2

Отзывы:

Бренды по названию

Популярные бренды