23
HOW TO USE THE SETTINGS MODE
The console features a settings mode that allows you
to connect the treadmill to your own wireless network
and to log in to your iFit Live account. The settings
mode also allows you to select the unit of measure-
ment and to turn on and turn off the display demo
mode. You may also be able to select a language.
1. Select the settings mode.
Insert the key into the
console (see step 1 on
page 17). Next, select
the main menu (see
step 2 on page 17).
Then, touch the i button
near the lower right cor-
ner of the screen to select the settings mode.
2. Select the wireless network mode.
If desired, touch the Wireless Network button on
the screen. Note: It may take a few moments for
the list of wireless networks to appear.
Note: You must have your own wireless network
and an 802.11b/n router with SSID broadcast en-
abled (hidden networks are not supported).
Make sure that the WiFi checkbox near the upper
right corner of the screen is marked with a green
checkmark. If it is not, touch the checkbox once
and wait for a few seconds. The console will
search for available wireless networks.
When a list of networks appears, touch the desired
network. Note: You will need to know your network
name (SSID). If your network has a password, you
will also need to know the password.
An information box will ask if you want to connect
to the wireless network. Touch the Connect button
to connect to the network or touch the Cancel but-
ton to return to the list of networks. If the network
has a password, touch the password entry box. A
keyboard will appear on the screen. To view the
password as you type it, touch the Show Password
checkbox.
To use numbers or other characters on the key-
board on the screen, touch the .?123 button. To
view more characters, touch the Alt button. Touch
the Alt button again to return to the number key-
board. To return to the letter keyboard, touch the
ABC button. To view capital characters, touch the
button with an upward-facing arrow. To return to
the lowercase keyboard, touch the arrow button
again. To clear the last character, touch the button
with a backward-facing arrow and an X.
When the console has connected to your wireless
network, the WiFi box at the top of the screen will
display the word CONNECTED. Then, touch the
Home button on the console to return to the set-
tings mode.
To disconnect from a wireless network, select the
wireless network and touch the Forget button.
If you are having problems connecting to an en-
crypted network, make sure that your password is
correct. Note: Passwords are case-sensitive.
Note: The iFit Live mode supports unsecured and
secured (WEP, WPA, and WPA2) encryption. A
broadband connection is recommended; perfor-
mance depends on connection speed.
Note: If you have questions after following
these instructions, go to www.iFit.com/support
for assistance.