![background image](http://html1.mh-extra.com/html/nordictrack/ntex04900/ntex04900_user-manual_1702785008.webp)
8
9. Identify the Left Pedal (69) (there is an “L” on the
Left Pedal for identification). Using an adjustable
wrench, firmly tighten the Left Pedal
counterclock-
wise into the Left Crank Arm (51). Tighten the Right
Pedal (not shown)
clockwise into the Right Crank
Arm (not shown). Tighten both Pedals as firmly
as possible.
Important: After using the recumbent cycle for
one week, retighten the pedals. For best perfor-
mance, the pedals must be kept properly tight-
ened.
21
69
51
9
10. Make sure that all parts are tightened before you use the recumbent cycle. Place a mat beneath the
recumbent cycle to protect the floor.
8. Position the Seat Carriage (6) as shown. Slide the
Seat Frame Cover (84) into the slot in the Seat
Frame (7). The beveled end of the Seat Frame
Cover should be flush with the end of the Seat
Frame. Attach a Seat Stop (77) and the Seat Frame
Cover to the Seat Frame (7) with an M4 x 16mm
Screw (64).
Push the Seat Frame Cap (13) into the end of the
Seat Frame.
77
64
13
7
84
Slot
6
8