NordicTrack NTEL99416.0 Скачать руководство пользователя страница 20

Страница: 20 / 28

MAINTENANCE

Regular maintenance is important for optimal

performance and to reduce wear. Inspect and properly

tighten all parts each time the elliptical is used.

Replace any worn parts immediately.

To clean the elliptical, use a damp cloth and a small

amount of mild soap. IMPORTANT: To avoid damage

to the console, keep liquids away from the console

and keep the console out of direct sunlight.

CONSOLE TROUBLESHOOTING

If the console does not turn on, make sure that the

power cord is fully plugged in.

If the console does not display your heart rate when

you hold the handgrip heart rate monitor, or if the

displayed heart rate appears to be too high or too low,

see step 5 on page 15.

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback, the

reed switch should be adjusted. To adjust the reed

switch, first press the power switch to the off posi-

tion and unplug the power cord.

Next, remove the

four M4 x 16mm

Screws (not

shown) from the

Large Storage

Foot (27), and

then remove the

Large Storage

Foot. Then,

remove the two

M4 x 16mm

Screws (not

shown) from the Top Shield (37), and use a stan-

dard screwdriver to pry the Top Shield upward off the

elliptical.

Then, look into the access opening and locate the

Reed Switch (58). Rotate the Pulley (66) until a

Magnet (41) is aligned with the Reed Switch.

Slightly loosen the two indicated M4 x 16mm Screws

(61). Slide the Reed Switch (58) slightly toward or

away from the Magnet (41), and then retighten the

Screws.

Then, plug in the power cord, press the power switch

to the reset position, and rotate the pulley for a

moment. Repeat these actions until the console dis-

plays correct feedback.

When the reed switch is correctly adjusted, press the

power switch to the off position, unplug the power cord

and reattach the top shield and the large storage foot.

Then, plug in the power cord.

MAINTENANCE AND TROUBLESHOOTING

Содержание NTEL99416.0





























Результаты поиска

Содержание NTEL99416.0

Отзывы:

Бренды по названию

Популярные бренды

NordicTrack NTEL99416.0, Руководство пользователя

Результаты поиска

Содержание NTEL99416.0

Отзывы:

Бренды по названию

Популярные бренды