NordicTrack NTEL01310.3, Руководство пользователя

Страница: 11 / 36

11
13. Apply grease to a Pedal Arm Axle (36) and to a
Wave Washer (95).
Orient an Upper Body Leg (46) as shown.
Note: For clarity, the Right Upper Body Arm (61)
is not shown in this step.
Insert the Pedal Arm Axle (36) through the Right
Pedal Arm (58), the Wave Washer (95), and the
Upper Body Leg (46).
Next, insert a hex key into the M8 x 16mm
Patch Screw (120) in the Pedal Arm Axle (36).
Using a second hex key, tighten another M8 x
16mm Patch Screw (120), an Axle Cover (53),
and an M8 x 25mm Washer (98) into the other
end of the Pedal Arm Axle (36).
Repeat this step on the other side of the
elliptical.
53 98
95
36
Grease
58
120
120
46
14
46
46
47
61
96
102
Hexagonal
Holes
14. Insert the Right Upper Body Arm (61) into the
right Upper Body Leg (46).
Attach the Right Upper Body Arm (61) with two
M8 x 35mm Bolts (96) and two M8 Locknuts
(102). Make sure that the Locknuts are in the
hexagonal holes.
Repeat this step for the Left Upper Body
Arm (47) and the other Upper Body Leg (46).
13