12
11. With the help of a second person, hold the con-
sole assembly near the Handrails (79) (only one
is shown).
Connect the ground wire from the console
assembly to the Ground Wire (80) on the Pulse
Crossbar (81).
Connect the Upright Wire (91) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Then, remove the wire tie from
the Upright Wire.
11
Console
Assembly
91
91
Wire
Tie
Console
Wire
Console
Wire
79
80
Ground
Wire
81
12. Set the console assembly on the Handrails (79).
Make sure that no wires are pinched. Insert
the excess Upright Wire (91) behind the Console
Frame (101).
Attach the console assembly to the brackets
on the Handrails (79) with the four 5/16" x 5/8"
Screws (11) that you removed earlier. Do not
tighten the Screws yet.
12
79
Console
Assembly
11
11
91
79
101
