15
HOW TO CHANGE CONSOLE SETTINGS
1. Select the settings mode.
To select the settings mode, press the Settings
button.
The display will show the total number of hours that
the exercise bike has been used and the total dis-
tance (in miles or kilometers) that has been pedaled
on the exercise bike.
If an iFit module is connected to the console, the
display will show the words WIFI MODULE or USB
MODULE.
If no module is connected, the display will show the
words NO IFIT MODULE. If no module is connected,
some of the settings options will not be available.
2. Navigate the settings mode.
While the settings mode is selected, the matrix of the
display will display several optional screens. Press
the decrease button next to the Enter button repeat-
edly to select the desired optional screen.
The lower section of the display will show instructions
for the selected optional screen. Make sure to follow
the instructions shown in the lower part of the
display.
3. Change settings as desired.
Demo—The console features a display demo mode,
designed to be used if the exercise bike is displayed
in a store. While the demo mode is turned on, the
console will show a preset presentation when it is not
in use. Press the Enter button repeatedly to turn the
demo mode ON or OFF.
Units—The currently selected unit of measurement
will appear in the display. To change the unit of mea-
surement, press the Enter button repeatedly. To view
distance in miles, select ENGLISH. To view distance
in kilometers, select METRIC.
Contrast Level—The currently selected contrast
level will appear in the display. Press the Resistance
increase and decrease buttons to adjust the contrast
level.
Trainer Voice—The currently selected setting for
the audio coach will appear in the display. Press the
Enter button repeatedly to turn the audio coach ON or
OFF.
Default Menu—The default menu will appear when
you press the Home button. Press the Enter but-
ton repeatedly to select the manual mode or the iFit
menu as the default menu.
Check Status—The words CHECK WIFI STATUS
or CHECK USB STATUS will appear in the display.
Press the Enter button. After a few seconds, the sta-
tus of the iFit module will appear in the display. To exit
this display, press the Settings button.
Send/Receive—The words SEND/RECEIVE DATA
will appear in the display. Press the Enter button. The
console will then check for iFit workouts and firmware
downloads.
4. Exit the settings mode.
Press the Settings button to exit the settings mode.
