NordicTrack Commercial VR25 Elite Скачать руководство пользователя страница 21

Страница: 21 / 40

HOW TO USE THE MANUAL MODE

1. Touch the screen, press any button on the

console, or begin pedaling to turn on the

console.

See HOW TO ACTIVATE THE CONSOLE on

page 19.

2. Select the main menu.

When you turn on the console, the main menu will

appear on the screen after the console boots up.

Touch the home button at the bottom of the screen

or press the Manual button to return to the main

menu at any time.

3. Change the resistance of the pedals as desired.

As you pedal, you can change the resistance of the

pedals.

To change the resistance, press one of the num-

bered 1 Step Resistance buttons or press the

Silent Magnetic Resistance increase and decrease

buttons on the console.

You can also press the Resistance increase and

decrease buttons on the right seat handlebar.

Note: After you press a button, it will take a

moment for the pedals to reach the selected

resistance level.

4. Follow your progress.

The console offers several display modes. The

display mode that you select will determine which

workout information is shown.

To select the desired display mode, simply flick or

slide the screen. You can also view additional work-

out information by touching the red boxes on the

screen.

If desired, keep your pedaling speed near the tar-

get cadence. The target zone meter will prompt you

to increase, decrease, or maintain your pedaling

speed. To view the target zone meter, flick or slide

the screen. Note: The target cadence is displayed

in revolutions per minute (rpm).

If desired, adjust the volume level

by pressing the volume increase

and decrease buttons on the

console.

You can also press the Volume increase and

decrease buttons on the left seat handlebar.

To pause the workout, touch one of the menu but-

tons on the screen. To continue the workout, touch

the Resume button. To end the workout session,

touch the End Workout button.

5. Measure your heart rate if desired.

To use the chest heart rate monitor, see page

16. To use the handgrip heart rate monitor, fol-

low the instructions below.

IMPORTANT: If you

use both heart rate monitors at the same time,

the console will not display your heart rate

accurately.

If there are

sheets of

plastic on

the metal

contacts on

the handgrip

heart rate

monitor,

remove the

plastic.

measure your heart rate, hold the handgrip heart

rate monitor with your palms resting against the

contacts.

Avoid moving your hands or gripping

the contacts tightly.

Contacts

Содержание Commercial VR25 Elite









































Результаты поиска

Содержание Commercial VR25 Elite

Отзывы:

Похожие инструкции для Commercial VR25 Elite

Бренды по названию

Популярные бренды

NordicTrack Commercial VR25 Elite, Руководство пользователя

Результаты поиска

Содержание Commercial VR25 Elite

Отзывы:

Похожие инструкции для Commercial VR25 Elite

Бренды по названию

Популярные бренды