9. Press the right Upright Cover (75) onto the right Upright
(85). Attach the Upright Cover with a 3/4” Screw (7).
Repeat this step on the other side (not shown).
85
75
7
9
8. Slide the two Upright Covers (75) onto the ends of the
Handrails (68, 70). Align the holes in the lower ends of the
Handrails with the holes in the Uprights (85). Do not drop
the Handrails into the Uprights.
Do not cut the indicated
black tie.
Loosely thread four Handrail Bolts (66) with four Star
Washers (67) into the Handrails (68, 70) and the Uprights
(85).
Firmly tighten the four Handrail Bolts.
85
85
75
68
70
66
67
66
75
8
67
Do Not
Cut
10. Remove the knob from the pin. Make sure that the collar
and the spring are on the pin.
Press the Latch Insert (77) into the left Upright (85) as
shown. Use a rubber mallet if necessary. Insert the pin
through the Latch Insert. Tighten the knob back onto the
pin.
77
10
Knob
85
Pin
Collar
Spring
11.
Make sure that all parts are properly tightened before you use the treadmill.
Keep the included allen
wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 31).
To protect the
floor or carpet from damage, place a mat under the treadmill.
9