manualshive.com logo in svg

NordicTrack Audiostrider 900 Elliptical, Руководство пользователя, Страница: 13 / 32

Поделиться
Скачать
NordicTrack Audiostrider 900 Elliptical Скачать руководство пользователя страница 13

13

HOW TO PLUG IN THE POWER CORD 

This product must be earthed. If it should malfunc-

tion or break down, earthing provides a path of least

resistance for electric current to reduce the risk of

electric shock. This product is equipped with a cord

having an equipment-earthing conductor and an earth-

ing plug. If the power cord is damaged, it must be

replaced with a manufacturer-recommended

power cord.

Two power cords

are included.

Select the one

that will fit your

outlet. Refer to

drawing 1, and

plug the indicated

end of the power

cord into the sock-

et at the back of

the elliptical exer-

ciser.

Refer to drawing 2.

Plug the power

cord into an appro-

priate outlet that is

properly installed

and earthed in

accordance with all

local codes and

ordinances. Note:

In Italy, an adap-

tor (not included)

must be used

between the power cord and the outlet. IMPOR-

TANT: The elliptical exerciser is not compatible

with GFCI-equipped outlets.

HOW TO FOLD AND UNFOLD THE ELLIPTICAL

EXERCISER

When the elliptical exerciser is not in use, the frame

can be folded out of the way. First, lift the latch under

each pedal arm, and lift the pedal arms off the sleeves

on the crank arms. 

Next, raise the pedal arms until they touch the mag-

nets on the upper body legs; the magnets will hold the

pedal arms in place. Then, hold the handle and lift the

frame until it locks in a vertical position.

To use the elliptical exerciser, first hold the handle,

press the latch button, and lower the frame. 

Next, pull the pedal arms off the magnets on the upper

body legs. Then, lift the latches under the pedal

arms, and set the pedal arms on the sleeves on the

crank arms. Release the latches, and make sure that

the pedal arms are securely connected to the crank

arms.

Latch

Sleeve

Pedal

Arm

Handle

Magnet

Latch

Button

Pedal Arm

HOW TO USE THE ELLIPTICAL EXERCISER

DANGER:

Improper connection of

the equipment-earthing conductor can result

in an increased risk of electric shock. Check

with a qualified electrician or serviceman if

you are in doubt as to whether the product is

properly earthed. Do not modify the plug pro-

vided with the product—if it will not fit the out-

let, have a proper outlet installed by a quali-

fied electrician.

FR/SP

U

1

Socket on

Elliptical

Exerciser

FR/SP

UK

Outlet

2

Содержание Audiostrider 900 Elliptical

































Отзывы:

Нет отзывов