3.
Route the Upright Wire (91) through the Left
Upright (84).
4. Attach the Left Upright (84). Then, repeat steps
2 and 4 on the right side.
2
84
84
Wire
Tie
91
Wire
Tie
91
84
3
10
Wires
1. Pull the Upright Wire (91) and the Base Ground
Wire (86) through the hole. Remove and discard
the Screw (A). Attach the Base Ground Wire.
Hole
6
A
86
90
Cut
91
Tie
91
2. Attach a Wheel (93). Attach a Thick Base Pad
(37) and a Thin Base Pad (92). Press the Base
Cap (87) in.
7
93
13
13
37
87
92
9