12
HOW TO TURN ON THE POWER
IMPORTANT: If the treadmill has been exposed to
cold temperatures, allow it to warm to room tem-
perature before turning on the power. If you do not
do this, the console displays or other electrical
components may become damaged.
Plug in the power cord (see
page 10). Next, locate the
reset/off circuit breaker on
the treadmill frame near the
power cord. Switch the cir-
cuit breaker to the reset po-
sition.
IMPORTANT: The console features a display demo
mode, designed to be used if the treadmill is dis-
played in a store. If the displays light as soon as
you plug in the power cord and switch the circuit
breaker to the reset position, the demo mode is
turned on. To turn off the demo mode, hold down
the Stop button for a few seconds. If the displays
remain lit, see step 4 on page 13 to turn off the
demo mode.
Next, stand on the
foot rails of the
treadmill. Find the
clip attached to the
key and slide the
clip onto the waist-
band of your
clothes. Then, in-
sert the key into the console. After a moment, the dis-
plays will light.
IMPORTANT: In an emergency situa-
tion, the key can be pulled from the console, caus-
ing the walking belt to slow to a stop. Test the clip
by carefully taking a few steps backward; if the key
is not pulled from the console, adjust the position
of the clip.
HOW TO PERSONALIZE CONSOLE SETTINGS
The console features a user mode that allows you to
designate yourself as User 1 or User 2, view your
workout history, and enter user information before you
begin exercising.
The console also features a settings mode that allows
you to select a system of measurement for the con-
sole, turn on and turn off the demo mode, enter an
audio trainer setting, adjust the volume and contrast
settings of the console, and turn on and turn off the
welcome screen.
1. Select the user mode.
To select the user mode, press the User/Enter but-
ton. The console can keep track of workout history
and save information for two different users.
When the User/Enter button is pressed, the words
“User 1 Selected” or “User 2 Selected” will appear
in the display. To identify yourself as User 1 or
User 2, press the User/Enter button once or twice.
IMPORTANT: To highlight options within the
menu, press the increase and decrease buttons
beside the User/Enter button.
2. View your workout history.
The display will show the total number of miles or
kilometers that the walking belt has moved, the total
number of hours that the treadmill has been used,
and the total number of calories that the user has
burned.
To reset any of the totals, first highlight the total
that you want to reset and press the User/Enter
button. Then, highlight NO or YES and press the
User/Enter button.
Reset
Position
Key
