Troubleshooting
W
ar
ranty
10
Imported by: Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
TROUBLESHOOTING
TROUBLE
SUGGESTIONS
1. Fan will - Check wiring connections to fan.
not start - Check fuses and circuit breakers.
- Check wiring connections in switch housing.
CAUTION: Turn power off for last two items.
2. Fan sounds - Check to make sure that all screws in motor housing
noisy are snug.
- Check to make sure that blade bracket screws are tight.
- Check to make sure that marettes in switch housing
are not rattling against wall of switch housing.
- If fan has a light kit make sure switch housing screws
and set screws are tight.
- Some fan motors are sensitive to signals from solid
state variable controls. If solid state controller is
used, change to an alternative control.
- Allow a 24-hour break-in period to eliminate
most noises.
3. Fan wobbles - Check that all blades are screwed firmly into blade
brackets.
- Check that blade brackets are secured firmly to motor.
- Check distance from tip of blades to ceiling. Gently
bend up or down the blade brackets until all distances
are the same.
- Check distance between blade tip to blade tip. All
measurements should be equal. Loosen blade screws
and position blade until even then retighten.
- Check that the downrod hemisphere notch is engaged
in canopy.
- Check to make sure that jam screws in downrod are
tightened.
- Make sure canopy and mounting bracket are tightened
securely to wooden joist.
- Make sure warpage has not occurred in wooden blades.
or shakes
excessively.
This For Living™ product carries a five (5) year warranty against defects
in workmanship and materials. Trileaf Distribution agrees to replace the
defective product free of charge within the stated warranty period, when
returned by the original purchaser with proof of purchase. This product is
not guaranteed against wear or breakage due to misuse and/or abuse.
