Nordic WP-L0118, Руководство по эксплуатации

Страница: 10 / 10

10
NORDIC
REMOVAL FROM SERVICE
Should the product be taken out of service (e.g. for cleaning, maintenance or storage for winter), then
proceed as follows:
•
Remove the battery from the product.
• Disconnect the hoses from the product and dry them.
• Let the remaining water drain out of the product through the water outlet opening.
• Dry up the product. If required, clean the housing.
• During winter, keep the product in a dry space protected against frost.
CARE AND CLEANING
• The product is maintenance-free. There are no servicable parts inside the product.
• If the product has not been operated for a long period of time, make sure that the drive impeller is
running properly. To do this, switch the product on briefly and then off again immediately.
• If the pump is blocked, connect a water hose to the pressure port and remove the cap at the suction
port. Turn on the faucet and switch on the product several times for about 2 seconds. This will clear
blockages in most cases.
• Remove the battery from the product before each cleaning.
• Do no use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can
cause damage to the housing and malfunctioning.
• Use a soft clean cloth to clean the outer surface of the product. If necessary, you can use a damp cloth
and a mild cleaning agent.
OPERATION (SWITCHING THE PRODUCT ON/OFF)
• Place the product on a flat, firm surface.
• Fill the product with water through the water filler openings. This accelerates the suction process.
• Switch the product on with the on/off switch. The product immediately starts up and starts pumping
water
• Switch off the product after operation.
• If you want to use the product again at another time, fill the product again with water through the
water filler openings.