2
NORDIC
PRODUCT SPECIFICATION
Voltage:
18V
DC
Rated Speed:
1
3
,000rpm
Planning Width:
82mm
Planning Depth:
2mm
Rabbeting Depth:
8mm
GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in
electric shock, fire and/or serious injury.
Keep safety warnings and instructions for future reference.
BEFORE USE
Remove any packing material and loose parts from unit.
Check the accessories before use. It should be fit with the machine and your purpose.
If the machine is new, the battery must first be charged.
Attention! After long time storage, the battery capacity will be reduce.
A new battery or one which has not been used for an extended period achieves full performance only
after charging and discharging cycles. A substantial drop in operating period per charge indicates that the
battery is worn out and must be replaced.
WORKING AREA
• Keep work area clean and well lit. Cluttered and dark areas invite accidents.
• Do not operate in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
ELECTRICAL SAFETY
• Always check that the power supply corresponds to the voltage on the rating plate.
• Plugs must match the outlet. Never modify the plug in any way. Do not use adapter plugs with earthed equipment.
Unmodified plugs and matching outlets will reduce the risk of an electric shock.
• Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and refrigerators. There is an
increased risk of an electric shock if your body is earthed.
• Do not expose to rain or wet conditions. If water gets inside, it will increase the risk of an electric shock.
