Assembly Steps
Your new vehicle requires adult assembly. Please set aside at least 40 minutes for
assembly. Children can be harmed by small parts, sharp edges and sharp points in the
vehicle's unassembled state. Care should be taken in unpacking and assembly of the
vehicle. Children should not handle parts, or help in assembly of the vehicle.
Please identify all parts before assembly and save all packaging material until assembly
is complete to ensure that no parts are discarded.
Assembly tool for need: screwdriver(not included), pliers(not included), hammer(not
included),Spanner(not included).
1. Install the back wheel.
Turn over the car body, disconnect the rear axle parts.
Put the driving wheel through the back axle and fix it with washer,nut and the wheel hub in turn.
Put the washer,wheel and another washer through the back axle on the other side in turn,then
fix them with nut and wheel hub.
2. Install the front wheel.
Remove the nut and washer on the
front axle;
As showed in the picture, fix the
washer, wheel, washer and nut onto
the axle in proper order.
Fasten the nut with spanner.
Fix the wheel hub.
Fix another wheel on the other side.
