Nordic ID EXA31, Руководство пользователя

Страница: 9 / 16

Nordic ID Group | Joensuunkatu 7 | FI-24100 Salo |Finland
358 2 727 7700 | Fax + 358 2 727 7720 | info@nordicid.com
9 / 16
2017-09-22
Nordic ID EXA31 User Guide
Version 1.0
NOTE! HID operation is slow and it’s not very useful for cases where
need to read and transfer high amount of tags (> 5)
4. Close application and make sure Bluetooth connection is closed
5. Reboot your Nordic ID EXA31 device by pressing the power button for 2...3 seconds.
1.10. OPERATING WITH HID MODE
HID BARCODE ENABLED
Reading Barcode:
• Pressing trigger down

barcode aimer starts

Releasing trigger

scanning start
•
When tag found, result is sent to HID immediately
• Pressing trigger down during scan

scanning aborted
HID RFID ENABLED
Reading RFID tags:
•
Pressing trigger down

RFID reading starts
• Reader read tags in memory as long trigger is kept down. Short beep when new tags found
•
Releasing trigger

Reading stops and tags in memory will be transmitted to HID. Short beep when
single tag sent. If no tags found, double low note beeps.
BOTH: HID BARCODE & HID RFID ENABLED.
Activate Barcode reader:
• Trigger click (short press (<350ms) and released immediately)

Barcode scanning starts immediately
without aiming.
•
Trigger press and keeping down at least 350ms

Barcode aimer starts

Trigger released

scanning
starts.
Activate RFID reader:
• Pressing trigger “double click” and keeping down

RFID reading starts. Searching tags. Beep when
tags found.
• Releasing trigger

Reading stops and tags in memory will be transmitted to HID. Short beep when
a single tag sent. If no tags found, double low note beeps.
• Pressing trigger during tag sending

aborted.
• Pressing trigger during barcode scanning

aborted.