-
Timer.
In the Timer function you can program On/Off time for all light function of the
App such as Spa Light, Sunrise, Breathing, Random or just any colour
and intensity you prefer.
To program timer function press Timer icon and +
Set requested time. Choose if only once or every weekday on the sliding bar.
Press Set up to enter Light menu. Chose colour, intensity or one of the preset
programs and press Done. You will now again see the time you set. Press Done.
In the Timer menu the On time is now displayed. To enter Off time press +
Enter Off time and press Set up.
In Set up menu press Off icon (Icon turn grey when in Off mode) Press Done
You will now again see the time you set. Press Done.
In the Timer menu the Off time is now displayed.
Maximum 5 sets of timer.
9. Speaker function
If your Flowerpot has the speaker function you can activate speaker by
pressing the Play icon.
You will hear a sound from your Flowerpot when speaker is activated.
The Play icon activates the wireless function in the Flowerpot and you can now go to
your Phones Bluetooth setting page where you will find the LUXX speaker in the listed
available connections.
Press the LUXX speaker to connect. Once connected the connection will be
programmed into the Flowerpot and Phone and you don’t need to do this step again
unless you disconnect for some reason. If so do the same steps again to reconnect.
The function of the Play icon is to activate the wireless unit in the Flowerpot.
The wireless unit consumes a lot of energy so remember to disconnect from the
speaker after use. Do so by pressing the ll icon. This deactivates the wireless
function in the Flowerpot.
After connecting to your phone to the Flowerpot you can play music from any of
your favorite music sources or directly from your phone.
If speaker is activated by other users without the NORDIC D´LUXX app can
connect to the speaker, simply by going to their Bluetooth settings in their phone
and connect to the speaker. All other user must be disconnected from the speaker
in order for new user to connect.
You can also connect to the speaker by pressing the On button under the base of
the Flowerpot. This activates the Bluetooth chip in the Flowerpot and you can now
connect via Bluetooth settings in your phone.
10. Naming your Flowerpots. You can name your Flowerpots in the menu of each
Flowerpot. Press the wheel in the upper right corner. Press “name” and write the
name you want to give the device. Press “done”.
11. Light groups. You can make your own light groups with two or more Flowerpots
in the menu under My devices. Press the + icon and hereafter Light group. Now a new
17
