Nordcap 700l Refrigerator, Инструкция по эксплуатации, Страница: 9 / 86

P2M029STD - Ver.1.2 8
GB
Operation
Temperature Setting and Control

The front panel of the thermostat display:
1. Thermostat Display
2. Light Key (Active on Glass Door)
3. Defrost Key
4. Stand-By Key
5. Up Key
6. Set Key
7. Down Key
LED Mode Function/ Explanation
ON Compressor Operation Indicator
Flashing Compressor Start Delay Indicator
ON Defrost enabled
Flashing Drip time in progress
ON Fan Operation Indicator
Flashing Fan Delay Indicator (After Defrost)
ON Alarm Indicator
ON Light Indicator (active on glass door)
ON Measurement Unit Indicator
Flashing Programming Mode
How to switch the unit from Stand By Mode to ON mode/ How to switch the unit from ON Mode to Stand By mode
• Press and hold the On-/Off key for 2s.
How to see the set point
• Push and immediately release the key, the set point is displayed.
• Push and immediately release the key or wait about 15s to return to normal visualisation.
How to change the set point
• Push the key for more than 2 seconds to change the set point value
• The value of the set point will be displayed and the “°C” starts blinking
• To change the set value push the “ “ (up) or “ ” (down) arrows within 15s.
• To memorise the new set point push the key again or wait for 15s.
Automatic defrost
• The appliance will automatically run defrost cycles.
Note: The defrost timer starts from the time the appliance is initially powered up.
Manual Defrost:
• Press and hold the “ ” DEFROST button for 3 seconds.
• The defrost cycle will start immediately and the Defrost LED illuminates.
Note: Starting a manual defrost also resets the automatic defrost timer.
How to see recorded MINIMUM and MAXIMUM temperatures
• Press and release the “ “ or “ ” key. The recorded MIN (“Lo”)/MAX (“Hi”) temperature is displayed.
• To reset the record press for 3s while the MIN or MAX temperature is displayed.
• The display will show “rSt” to confirm the RESET.
How to Lock and Unlock the keyboard
• Press both “ “ and “ ” key at the same time for more than 3s. The display shows “PoF”/ “Pon” to indicate that
the keyboard is locked/ unlocked.