Nordcap 477800155, Руководство по обслуживанию

Страница: 17 / 22

GB
The door can be changed from right-hinged to left-hinged and vice versa as follows:
Reversible door
1. Lay the appliance on its back
and loosen the upper hinge.
2. Remove the upper hinge.
6. Carefully remove the covers
on the side of the plinth using
a flat-headed screwdriver.
7. Pull up the hinge pin...
...and fit it on the opposite side.
8. Unscrew the lock pin using a
flat-headed screwdriver.
3. Rotate the glass door 180° (On
the smaller cabinets (1500mm)
desmount the handle. The screws
are on the inside of the sealing
strip. Move the handle 400mm up
and mount it again so it is in the
same height as before.)
4. You will need to remove the magnet on the underside of the door by unscrewing the two screws, pulling
the magnet away from the door. Also with a small Philips head screwdriver remove the Vintec logo
badge and swap the magnet where the badge was and vice versa.
5. Remove the top and bottom bushes on the door frame (the bushes are the black, round plastic pieces
which fit into the top and bottom hinges) and swap them so that the bush which was on top is now on
bottom and vice versa.
GB
17