Instructions Manual
N.º
467_SERIE_A_BEDI
ENUNGSANWEISU
NG_2009-03
467_SERIE_A_BEDIENUNGSANWEISUNG_2009-03
14/39
TEC
4.3.3
Change of the DIFFERENTIAL
1- Press for 5 seconds, it shows PS;
2 – Press the key or or till the parameter rd;
3 – Press the key to display the value of the parameter;
4 – Press the key or to change the value;
5 – Press the key to confirm temporarily the new value and display the parameters code;
6 – To memorise the new value press the key for 5 seconds.
4.4
Cleaning
To ensure perfect hygiene and conservation, daily cleaning is recommended. This involves:
Cleaning the surfaces frequently and carefully with a damp cloth.
Always when using water and detergent, make sure these are neutral, and avoiding those which are chlorine-based
or abrasive.
Rinsing with clean water and drying carefully.
It is entirely inadvisable to use pressurised jets of water, specially in the direction of the compressor.
4.5
Maintenance
To ensure that the cooling system lasts for a long time and functions correctly, regular
maintenance of the condenser should be carried out. This should be done in the
following way:
Switch off the appliance and unplug it.
Open the compressor compartment; the condenser will be easily
accessible.
Pass the vacuum cleaner or a brush across the condenser in the slat’s direction.
Be careful not to stretch the cables. Remember to close the compartment.
4.6
Prolonged Inactivity
When long periods of inactivity are foreseen, the following procedure is recommended:
Unplug the appliance.
Remove all food products.
Carry out maintenance operations.
4.7
Anomalies
If you notice any anomalies or malfunctions, before calling the technical services, check that:
The general switch is on.
The equipment is not near any heat sources.
The condenser is clean and the fan motor is functioning.
If the problem persists, it is recommended that you remove everything from inside the appliance, unplug it, and seek technical
assistance.
Note: Maintenance must be carried out by specialized staff and the manufacturer declines any responsibility for the use of
unauthorized parts which cancel the guarantee.
