APPLIANCE
Rev. 01 of 01/07/2019
Translation of the original instructions in Italian
SOLL.
7.4
Changing the parameters
The parameters on the screens are always changed in the same way.
Below are the instructions valid on all screens:
Select the cycle.
The screen that appears allows you to change the standard parameters using the
special scroll bar.
To change the phases of the cycle, press the Advanced key.
The screen that appears allows you to activate the phase by checking the box.
Press the Pencil key to change the specific parameters of the activated phase.
Press the Confirm key to activate the parameters entered.
The following diagram shows an example with a summary of the operation to be performed
to change the parameters.
Example of changing parameters Fig. 7.4
63
