APPLIANCE
Rev. 01 of 01/07/2019
Translation of the original instructions in Italian
Warning! The packaging components may be potentially dangerous for
children and animals; make sure they do not play with these materials.
IMPORTANT!
All the various components of the packaging must be disposed of in
accordance with the regulations in force in the Country where the
appliance is used. In any case, nothing must be dispersed in the
environment.
5.3
Electrical connection
After checking that voltage and electrical frequency correspond to the data indicated on the
CE plate (Fig. 4.1), the appliance can be connected to the electrical power supply.
1.
Connect the power cord to the mains by means of a suitable switch with a contact
opening of at least 3 mm per pole. The grounding connection must not be
interrupted.
2.
Make sure that the electrical system complies with the regulations in force.
3.
Make sure that the system is dimensioned to the electrical power to be installed.
4.
In case of replacement, use electrical cables with characteristics not inferior to the
original ones.
Warning! Make sure that the plug is accessible even after installing the
appliance correctly! If you do not need to use the entire length of the
cable, do not wrap it around itself but leave it free and make sure that it
does not get in the way or cause danger. Moreover, make sure that it is
not crushed or bent.
Warning! Mae sure that the power cord does not come into contact with
liquids of any kind or with sharp objects or corrosive hot substances. Do
not allow children or animals to play with the power cord.
5.4
Hydraulic connection (only for versions with humidity generator)
1.
Screw the flexible hose onto the water mains inlet connector (Ref 1 Fig. 5.3).
2.
Manually tighten the nut of the flexible hose on the water mains inlet connector.
57
