Nordcap 406600891, Руководство по обслуживанию

Страница: 27 / 76

27
LIBERO LINE HOB INDUCTION
2.5 FIRST START UP
Once that all the supplies connections have been carried out it’s time to start up the appliance.
Remove the entire protective film from all the
paneling’s and door; the protective film can be easily removed
when the appliance has not been heated up. If the appliance is run for a long period without removing the
protective film the film could melt and then be difficult to remove / damage the
paneling’s finishing.
DAILY STARTUP
Before you turn on the appliance make sure that:
The mains voltage and frequency match those indicated on the appliance data plate at §
DATA PLATE (IDEN-
TIFICATION STICKER). Visual check if the supply cable is in good condition.
COOKING ZONES
HOB appliances, depending on model, can have one or two cooking zones.
2.6 COMMISSIONING
Please refer to the Commissioning form; the document is available for authorized technicians on the web sites
(PRIDE-SERVICE PORTAL- AGELUX etc..) In case of any doubt, refer to your local country customer care.