9
IMPORTANT
In case of a significant anomaly (e.g. short circuits,
wires coming out of the terminal block, motor
breakdowns, worn electrical cable sheathing, etc.)
the operator must immediately deactivate the
machine.
D
GENERAL INFORMATION
D.1
Introduction
Given below is some information regarding the intended use of
this appliance, its testing, and a description of the symbols
used (that identifies the type of warning), the definitions of
terms used in the manual and useful information for the
appliance user.
D.2
Definitions
Listed below are the definitions of the main terms used in the
manual. It is advisable to read them carefully before use.
Operator
machine installation, adjustment, use,
maintenance, cleaning, repair and trans-
port personnel.
Manufacturer
Electrolux Professional SpA or any other
service centre authorised by Electrolux
Professional SpA.
Operator for
normal
machine use
an operator who has been informed and
trained regarding the tasks and hazards
involved in normal machine use.
Customer
Care service
or specialised
technician
an operator instructed/trained by the
Manufacturer and who, based on his
professional and specific training, experi-
ence and knowledge of the accident-
prevention regulations, is able to appraise
the operations to be carried out on the
machine and recognise and prevent any
risks. His professionalism covers the
mechanical, electrotechnical and elec-
tronics fields.
Danger
source of possible injury or harm to health.
Hazardous
situation
any
situation where
an operator
is
exposed to one or more hazards.
Risk
a combination of probabilities and risks of
injury or harm to health in a hazardous
situation.
Protection
devices
safety measures consisting of the use of
specific technical means (guards and
safety devices) for protecting operators
against risks.
Guard
an element of a machine used in a specific
way to provide protection by means of a
physical barrier.
Safety device
a device (other than a guard) that elimi-
nates or reduces the risk; it can be used
alone or in combination with a guard.
Customer
the person who purchased the machine
and/or who manages and uses it (e. g.
company, entrepreneur, firm).
Emergency
stop device
a group of components intended for the
emergency stop function; the device is
activated with a single action and pre-
vents or reduces damage to persons/
machines/property/animals.
Electrocution
an accidental discharge of electric current
on a human body.
D.3
Data plate position
The data plate is located on the front panel of the equipment.
IMPORTANT
Refer to the data given on the machine's data plate
for relations with the Customer Care service or the
Manufacturer.
D.4
Machine identification data
A reproduction of the marking or dataplate on the machine is
given below:
TYPE
machine type
PNC
product number code
MODEL
commercial description
SERIAL NO.
serial number
380-415V 3N~
power supply voltage
50 Hz
power supply frequency
6.68 kW
max. power installed
IP23
dust and water protection rating
CE
CE marking
Electrolux Professio-
nal SpA Viale Treviso
15 33170 Pordenone
Italy
manufacturer
WARNING
Do not remove, tamper with or
make
the
machine
marking
illegible.
IMPORTANT
When scrapping the machine, the marking must be
destroyed.
