nord NORDAC START Series, Руководство пользователя

Страница: 29 / 120

2 Assembly and installation
BU 0135 en-4118 29
2 Assembly and installation
2.1 Installation SK 1x5E
The devices are available in various sizes depending on their output. They can be mounted on the
terminal box of a motor or in its immediate vicinity.
Motor-mounted version Wall-mounted version
When a complete drive unit (gear unit + motor + SK 1x5E) is delivered, the device is always fully
installed and tested.
Information
Device version IP6x
IP6x-compliant devices must be installed by NORD, since special measures have to be implemented. IP6x
components that are retrofitted on site cannot ensure that this protection class is provided.
When delivered separately, the device includes the following components:
• SK 1x5E
• Screws and contact washers for mounting the motor terminal box
• Pre-fabricated cable for motor and PTC connections
The sizes of the device series only differ with regard to their possibilities for adapting to the matching
motors. For example, size 1 is coordinated with motor sizes 80 – 100, and size 2 is coordinated with
motor size 132. The external dimensions (envelope dimensions) of the devices are identical.