nord 6052902/0213, Руководство с инструкциями по установке, Страница: 51 / 128

3 Transport, storage, assembly
B 1050 en-3921 51
Maximum permitted Transnorm motor weights
Transnorm
315 355
Centre of gravity
X max1) [mm]
615 615
Weight [kg]
1500 1500
1)
see Figure 23 for dimension X max
Table 6: Transnorm motor weights
Getriebebau NORD must be consulted if the values stated in the table are exceeded.
Legend
1: Centre of gravity of
motor
Figure 23: Centre of gravity of motor
Fitting a motor with standard dog couplings (Rotex®)
Also pay attention to the separate documentation for the coupling.
If a different type of coupling is used, observe the documentation from the manufacturer for the
assembly sequence.
1. Clean the motor shaft as well as the flange surfaces of the motor and adapter. Check them for
damage. Check the attachment dimensions and tolerances of the motor and the adapter.
2. Push the half-coupling onto the motor shaft so that the parallel key of the motor engages into the
groove in the half-coupling on mounting.
3. Pull the half-coupling onto the motor shaft according to the instructions of the motor manufacturer.
Position the half-coupling according to the order-specific drawing of the coupling. If there are no
instructions on the drawing, align the half-coupling flush with the end of the motor shaft.