8
900 / 9100 / N600 / N800 Series
Side Wall Venting Components Required
For Assembly Kit Part Number 619020
QTY PART NUMBER
DESCRIPTION
1 ....... 618698b ............. Installation Instructions
2. ..... 61633330 ............ #8 x 3/8” Thermostat Mounting Screws
2 ...... 61581122 ............ #6 x 1 1/4” Bracket Mounting Screws
2 ........ 618951 .............. #8 x 2” Fan Mounting Screws
1 ........ 618978 .............. 6” Red Quick Connect Splice Wire #18 Gauge 4/64” Thermoplastic
Insulation
1 ........ 619017 .............. 6” Black Quick connect Splice Wire #18 Gauge 4/64” Thermoplastic
Insulation
2 ........ 618950 .............. Tie Rap Mounting Plate Adhesive Backed
1 ........ 619018 .............. Fan Wiring Diagram Label
1 ........ 618699 .............. 60” Red #18 Gauge Wire w/4/64” PVC Insulation, w/Quick Connect
Terminals, w/DC Fuse Holder
1 ........ 618700 .............. 24” Black #18 Gauge Wire w/4/64” PVC Insulation, w/Quick Connect
Terminals
1 ........ 618701 .............. 41” Red #18 Gauge Wire w/4/64” PVC Insulation, w/ Quick Connect
Terminals
1 ........ 618856 .............. 12 VDC Fan (Brushless .30 Amps)
1 ........ 618093 .............. 12 VDC Thermostat (130 On / 115 Off)
1 ........ 619016 .............. Fan Support Mounting Bracket (B)
1 ........ 618857 .............. Fan Support Mounting Bracket (A)
4 ...... 61417922 ............ Cable Ties
1 ........ 619023 .............. Package Label
1 ........ 619286 .............. Thermostat Warning Note
5. Pull the wires straight down from the thermostat and place a mounting plate about 12” down
from the condenser so the wires do not touch the condenser or the vertical tubing. Secure the
wires to the mounting plate with a tie wrap. Place the mounting plate under the sump and to
the left of the fan (Figure 2). Fold the excess wire as shown. Tie the folded wires to the
mounting plate under the sump with a cable tie to prevent the wires from moving by air flow.
This also prevents excess wire from getting caught between the side of the refrigerator and
theenclosure. Make sure the wires are pulled in tight between the tie wrap locations and that
the tie wraps are firmly secured.
The refrigerator is now ready for installation.
IMPORTANT: Install the refrigerator according to Norcold’s installation instructions.
Содержание 9162F
Страница 9: ...9...
