Owner’s Manual 11
Reinstall the Refrigerator
Your dealer or Norcold authorized service center must do this
procedure.
1. Push the refrigerator completely into the enclosure.
2. Install the screws in the mounting flange at the rear of the
refrigerator.
3. Install the screws from the upper and then the lower mount-
ing flanges on the front of the refrigerator.
4. Put the plastic plugs into the mounting flanges of the
refrigerator.
5. Connect the DC wiring to the refrigerator:
- Connect the DC wires to the refrigerator.
- Install the DC fuse or connect the DC wiring to the battery or
the converter.
6. Connect the black AC power cord and the white ice maker AC
power cord (optional) to the receptacle.
Replacement Parts
You may purchase replacement parts through your local RV
dealer or authorized Norcold Service Center.
- Remove the DC wires from the refrigerator.
3. Remove the plastic plugs from the mounting flanges of the
refrigerator.
4. Remove the screws from the upper and lower mounting
flanges on the front of the refrigerator.
5. Remove the screws from the mounting flange at the rear of
the refrigerator.
6. Remove the refrigerator from the opening.
Wiring Pictorial
The parts of the wiring pictorial are (See Art01674):
1 .................................................................... Display overlay
2 ...................................................................... Display board
3 ...................................................................... Divider heater
4 ............................................... Thermistor / Light assembly
6 ........................................................................ Power board
7 ............................................................ 120 VAC Power cord
8 .......................................................... 5 Amp fuse (120VAC)
9 ............................................................ 5 Amp fuse (12VDC)
10 ................................................. Movable door-seal heater
11 .................................................................................... Fans
12 ........................................................................ Thermostat
14 ................................................................... Door switches
15 ......................................................................... AC heaters
16 ........................................................... 12 VDC Conections
17 ............................................... Water line heater (optional)
18 ........................................................ Thermostat (optional)
Wiring Diagram
The parts of the wiring diagram are (See Art01675):
1 ........................................................................ Power board
2 .................................................................... 12 VDC ground
3 ........................................................................... Thermistor
4 .......................................................................... Interior light
5 ...................................................................... Divider heater
6 ................................................................... ON / OFF switch
7 ................................................................. Voltage regulator
8 ....................................................................... MODE button
9 ................................................................ TEMP SET button
10 .................................................................................. LEDs
11 ................................................................................ Beeper
12 .................................................................... Display board
13 ......................................................... 120 VAC Connection
14 ......................................................................... AC heaters
15 ................................................................... Door switches
16 ........................................................................ Thermostat
17 ................................................. Movable door-seal heater
18 ................................................................................... Fans
19 ............................................... Water line heater (optional)
20 ........................................................ Thermostat (optional)
21 .............................................................................. 12 VDC
The parts of the ice maker wiring pictorial and diagram are (See
Art01500):
1 ......................................................... 120V AC Hot / smooth
2 ..................................................... 120 VAC Neutral / ribbed
3 ...................................................................... Ground screw
4 ....................................................................... Thermal fuse
5 ........................................................... Solenoid water valve
6 ............................................................................. Ice maker
7 .......................................................................... Mold heater
8 .......................................................................... Thermostat
9 ..................................................................... Shut off switch
10 ........................................................................... Fill switch
11 ......................................................................... Hold switch
12 .................................................................................. Motor
Ice Maker Wiring Pictorial and Diagram
(Optional)
