Installation
This refrigerator must be installed in accordance with these Installation Instructions for the certifications and the
Norcold factory warranty to be in effect.
This appliance is certified under the latest edition of ANSI Z21.19 Standards by the American Gas Association
and is approved by the Canadian Gas Association.
Install the refrigerator in accordance with local codes. In the absence of local codes, the installation must conform
with the following, as applicable:
In the United States:
•
The National Fuel Gas Code, ANSI Z223.1.
•
The manufactured Home Construction and Safety Standard, Title 24 CFR Part 3280.
When an external electrical source is utilized, the refrigerator, when installed, must be electrically grounded in
accordance with local codes or, in the absence of local codes, the National Electrical Code, ANSI/NFPA 70.
In Canada:
•
Any applicable code.
•
Current Can 1-B 149.2 Installation Code for Propane Appliance and Equipment.
The refrigerator must be electrically grounded with the current Canadian Electrical Code C22.2 Parts 1 and 2.
Locating the Refrigerator
WARNING: Improper location, installation, adjustments, or unauthorized modifications can cause
injury or property damage. Refer to this manual for proper instructions. For assistance or additional
information consult a qualified installer, service agency, or your gas supplier.
The Norcold refrigerator is to be located on a solid and
level floor that is strong enough to support the com-
bined weight of the refrigerator and its contents. Keep
the refrigerator away from direct sunlight and other heat
generating sources.
The refrigerator must be installed with the following
clearances:
Top:
6 inches minimum
Right Side:
2 inches minimum
Left Side:
0 inch minimum
Bottom:
0 inch minimum
Rear:
0 inch minimum
Do not locate the refrigerator in an area where the flow
of combustion and ventilation air is obstructed.
Notice
: Never install the refrigerator directly on carpet-
ing or vinyl floor covering. Carpeting or vinyl
flooring must be protected by a metal or wood
panel beneath the refrigerator. The panel
should extend at least the full width and depth
of the refrigerator.
Keep the refrigerator and the surrounding area clear
and free of combustible materials, gasoline, and other
flammable vapors and liquids.
Figure 2
Locating and Installing the Refrigerator
2
Содержание 1082
Страница 7: ...Wiring Diagram and Schematic 6 ...
