Norco EMB-3501, Руководство пользователя, Страница: 29 / 40

20
EMB-3501 V1.0 Freescale i.MX6 Platform Motherboard
JFP
：
Signal Name Pin Signal Name
LED+ 1 2 LED-
RST+ 3 4 RST-
PWRSW+ 5 6 PWRSW-
Please connect following chart below, and pay attention to the anode (+) and cathode (-). If it is
falsely connected, it may not function well.
POWER LED
RESET SW
PWR SW
1
）
System power LED pins (pin1, pin2 for PWLED)
Connect system power LED cable with these pins.
（
pin 1 is LED anode
）
When system is power
on, power LED is on
；
when system is power off, power LED is off.
2
）
Reset Button Pins
（
Pin 3, Pin4 for RESET BUTTON
）
Connect the reset button cable to these two pins. When system fails, the reset button will
restart the system to back to work so there is no need to turn on / off power.
JFP