Norco BIS-6660C, Руководство пользователя

Страница: 15 / 69

BIS-6660C
User Manual
4
•To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
•Before connecting or removing signal cables from the motherboard, ensure that all power
cables are unplugged.
•Do not damage the power cord nor place heavy objects on it, stretch it or over bend it.
Damage to the cord may result in or electric shock.
•Make sure that your power supply is set to the correct voltage in your area. Incorrect voltage
may cause personal injuries and damage the system.
Operation Safety
•Before installing the motherboard and adding devices on it, carefully read all the guides that
came with the package.
•To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots,
sockets and circuitry.
•Do not use the system where there is a lot of dust, humidity is high, or where the system may
come into contact with oil or steam, as this could lead to fire.
•Ensure that the system does not come into contact with water or other fluids. Ensure that no
objects such as paper clips or pins enter the system as this could lead to electric shock.
•Do not place the system in unsafe places. Do not allow the system to receive strong shocks or
to strongly vibrate. Causing the system to fall or topple over may damage it..
•Do not use the system near heating equipment or in places where there is likelihood of high
temperature, as this may lead to generation of excessive heat and outbreak of fire.
•Do not use the system in places where it may be exposed to direct sunlight.
The product specification and pictures are subject to change without prior notice!