Norco BIS-1280, Руководство пользователя

Страница: 4 / 31

Safety Instructions
1. Please read the product manual carefully before using this product.
2
．
Put all the unused or uninstalled boards or electronic components in a static dissipative
surface or static shielding bag.
3
．
Always ground yourself to remove any static discharge before touching the board, to place
your hands on grounding metal object for a while or wear an anti-static wrist strap at all times.
4. When taking or fetching the boards or cards, please wear anti-static gloves and have the
habit of holding the boards by its edges.
5
．
Make sure that your power supply is set to the correct voltage in your area. Incorrect voltage
may cause personal injuries and damage the system.
6
．
To prevent electronic shock hazard or any damage to the product, please ensure that all
power cables for the devices are unplugged when adding or removing any devices or
reconfiguring the system.
7
．
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
8
．
When adding or removing devices to or from the system, ensure that all the power cables for
the devices are unplugged in advance.
9
．
To prevent any unnecessary damage to the products due to frequent power on/off, please
wait at least 30 seconds to restart the unit after the shutdown.
10
．
If system goes wrong during the operation, do not try to fix it by yourself. Contact a qualified
service technician or your retailer.
11
．
This product is classified as Class A product, which may cause radio interference in our
living environment. On this occasion, users need to take measures to handle the interference.