Norco ATX-6991, Руководство пользователя

Страница: 14 / 78

ATX-6991 User's Manual
5
2.2 Installation Steps
Please refer to following steps to assemble your computer
：
1
．
Adjust all jumpers on board ATX-6991 according to the user manual.
2
．
Install CPU and CPU fan
3
．
Install memory
4
．
Install other expansion cards
5
．
Connect all signal lines, cables, control panel circuit and power supply unit.
6
．
Start the computer and complete BIOS settings.
Key components of this motherboard are Integrated circuit and these components
could be easily damaged by electrostatic influence. So, before installing this unit, please
always keep the following precautions in mind
：
1
．
Hold the board by edges and don’t touch any components, plugs or socket pins.
2
．
Wear anti-static gloves/wrist strap while touching the integrated circuit components, such as
CPU, RAM, etc.
3
．
Put those unused or uninstalled components in static shielding bags or trays.
4
．
Please first check the power switch is off before connecting the power plug.
2.3 Install Memory
ATX-6991 provides 4x dual channel DIMM memory slot
，
support DDRIV 2666/2400Mhz
，
single slot up to 16G
，
whole board memory up to 64GB
，
please follow the steps below for
detailed installation
：
1
．
During installation, align the notch of the memory module with the notch of the socket, and
then firmly insert it.
2
．
When selecting a memory module, you must select a memory module that supports this
motherboard specification.
Before installing the computer accessories
Following the instructions below will help to prevent your computer from being damaged,
and also ensuring your personal safety.
1
．
Please make sure your computer is disconnected from the power supply.
2
．
Please always wear anti-static strap or gloves to operate the board in case that you may
touch the integrated circuit components, such as RAM.