NORBAIN VAIDe, Руководство пользователя

Страница: 8 / 11

Motherboard Overview
IDE
Connectors
Power
Supply
Load
Resistors
Jumpers
IDE Power
Connectors
2.3 Mounting The Hard Drives
Slide the hard drive into place under the hard drive support bracket. Orient the
hard drive so that the IDE Power Connector is near the bottom of the chassis and
facing the motherboard. Populate the drive array in order, starting from the left.
Fasten the drive in place using the supplied screws. Fasten each drive using two
screws through the bottom of the chassis and one screw in the Hard Drive
Support Bracket.
2.4 Configuring Master/Slave
Hard drives are connected in pairs to
each of the four IDE connectors. Each
pair of hard drives must have a Master
and a Slave. Configure the
Master/Slave setting on each hard
drive individually using the jumpers
provided with the drive. Use the
diagram located on the hard drive to
determine the proper jumper
configuration.
If a single drive is connected to an IDE
connector, it must be configured as a
Master.
IDE Connector #1
IDE Connector
Di
sk
1
Ma
st
er
Di
sk
2
Slav
e
Di
sk
3
Ma
st
er
#2
IDE Connector #3
IDE Connector #4
Di
sk
4
Slav
e
Di
sk
7
Ma
st
er
Di
sk
8
Sla
ve
Di
sk
5
Ma
st
er
Di
sk
6
Sla
ve
When configuring the jumpers on the hard drive, select 16 Heads, Master or
Slave .
Norbain VAIDe 8 0150-0186b