NORAUTO Sound 2054218, Руководство пользователя

Страница: 128 / 133

127
Aux 1 / Aux 2 Controls
Aux 1
Aux 1 is used for playback of audio/video
from an external device connected to the unit
through a 3.5mm jack located on the front
panel.
Aux 2
Aux 2 is used for playback of audio/video from
an external device connected through RCA
connectors located on the back of the unit.
You can connect an external audio/video
device to the unit.
1. Connect the external device with the
supplied AV cable.
2. Touch the upper left corner to display the
main menu.
3. Touch [Aux 1] / [Aux 2] to access external
device.
NOTES:
1. Audio/Video device must be connected to
the unit using an audio/video adapter cable
that is available separately.
2. Video will only play when the vehicle parking
brake is engaged. The parking brake must
be connected for this feature to operate.
Reset
When the unit hangs up, you can reset it.
Press the [ ] Key and take off the front
panel
,
press [ RESET ] with a ball-point pen or
similar tool.
NOTE:
When the [RESET] button is pressed,
frequencies of radio stations, date, time, etc.
stored in memory are cleared.
Other Modes
Replace a Fuse
If there is no power, the fuse may be damaged
and need to be replaced.
1. Remove the unit from the dashboard.
2. Check all electrical connections.
3. Buy a fuse that matches the amperage of
the damaged fuse.
4. Replace the fuse while the unit is powered
off.
Rear Camera Operation
This unit is “camera ready.” Before accessing
any camera features, you must install a rear
video camera (sold Separately).
When the camera is installed, the rear view
image of what is behind the vehicle will appear
when the vehicle is placed in reverse gear.
When leaving reverse gear, the unit displays
the previous screen.