97
EN
REAR CAMERA OPERATION (OPTIONAL)
Using Rear
Camera
Connect an optional rear camera to the Camera Input (Black RCA
connector). Refer to the wiring diagram for details.
Auto Selection
The unit will automatically select camera mode when connected to
the reverse lamp circuitry.
Note:
The external video output is not active when using the rear
camera input.
SWC INPUT OPERATION
The built-in SWC Interface is compatible with PAC steering wheel control modules.
The PAC SWI-RC is recommended. A third-party adapter must be used in order for
the NS-X2800DBT to be compatible with any steering wheel controls. The following
controls are available for most vehicles.
1.
Reset
2.
Mode
3.
Seek/Track Up (+)
4.
Seek/Track Down (-)
5.
Mute
6.
Volume Up (+)
7.
Volume Down (-)
8.
Band
9.
BT Talk
10.
BT End
Note:
Not all OE steering wheel functions may be supported by the NS-X2800DBT.
TROUBLESHOOTING
PROBLEM
CAUSE
ACTION
Unit will not turn on
(no power)
Yellow wire not connected or
incorrect voltage Red wire not
connected or incorrect voltage
Check connections for proper
voltage (11~16VDC)
Black wire not connected
Check connection to ground
Fuse blown
Replace fuse(s)
Unit has power (but
no sound)
Speaker wires not connected
Check connections at speakers
One or more speaker wires
touching each other or touching
chassis ground
Insulate all bare speaker wires
from each other and chassis
ground
Unit blows fuse(s)
Yellow or red wire touching
chassis ground
Check for pinched wire
Speaker wires touching chassis
ground
Check for pinched wire
Incorrect fuse rating
Use fuses with correct rating
Unit has audio (but
no video)
Parking brake safety circuit not
connected Parking brake not
applied
Check connections at parking
brake
Apply parking brake as
described on page 26
IR remote does not
work
Dead battery
Replace battery