The Maintenance screen will display.
The display will begin programming. Once this
screen is shown, release the programming switch.
After the display is programmed, a touch screen
calibration prompt will appear. Touch the center of
each crosshair (there will be five (5)) with a stylus.
The crosshairs will appear one at a time; all are
shown in the graphic for reference.
It is important to touch each quickly as lingering on
one will register as the touch for the next. If one is
missed, the screen will not function properly and
the display must be reprogrammed.
While the program is loading, the NORAC main
screen will be shown.
Once the program is loaded, the NORAC UC5
Liability screen will be displayed. The program may
take up to a minute to load. Press the check button
to continue.
7.
Remove the USB drive from the PULSE.
1
2
5
3
4
